T series_T200

Countertop Water Filter with Faucet Valve

Get your drinking water like getting the beer! T200 has its own faucet valve, which gives more freedom to placing the system. The faucet valve system also eliminates water drip after using the system.

Clean Water
with Ease and Comfort​

Minimal Environmental
Footprint

Abundant and Instant
Water Flow

Ergonomic & Efficient
Design

Custom Installations
with 4 models

Innovative and Competitive
Tri-Filtering System

Get your drinking water like getting the beer! T200 has its own faucet valve, which gives more freedom to placing the system. The faucet valve system also eliminates water drip after using the system.

Clean Water
with Ease and Comfort​

Minimal Environmental
Footprint

Ergonomic & Efficient
Design

Abundant and Instant
Water Flow

Custom Installations
with 4 models

Innovative and Competitive
Tri-Filtering System

LED Flowmeter / Filter Reminder

Filtering: Filter in operation.
Reorder: Order a replacement filter. (alternating red and blue)
Replace: Replace the filter.

Faucet Valve

Enjoy clean and safe water with a smooth turn of
faucet valve. Its also prevent water drip after use.

No Tools Needed

Installation and maintenance are simple and convenient.
No tools are required. Simply twist and open the body to replace
the filter with ease.

Aeration

A stainless steel aerator creates a water flow that is uniform in
shape and size. Micro-bubbles in the stream provide a consistent
flow that is ideal for washing dishes or food preparation.

Easy to Install

M_200_1favicon

01

Decide a place of installation.
Use the accompanying drill bit (6.4 mm,
1/4") if necessary.

M_200_2favicon

02

Connect the inlet tube to the reducing
valve AND secure with a locking clip.

M_200_3favicon

03

Close the cold water supply valve.
Connect the diverter valve (1/4") to the
cold water supply.

M_200_4favicon

04

Install the battery in the LED flowmeter.
Check if the LED flowmeter blinks blue,
while water is coming out.

M_200_5favicon

05

Let the water drain out for at least
2 minutes.

M_200_6favicon

06

Put the coaster according to the
outlet of water.

M_200_1favicon

01

Decide a place of installation. Use the accompanying drill bit (6.4 mm, 1/4") if necessary.

M_200_2favicon

02

Connect the inlet tube to the reducing valve AND secure with a locking clip.

M_200_3favicon

03

Close the cold water supply valve. Connect the diverter valve (1/4") to the cold water supply.

M_200_4favicon

04

Install the battery in the LED flowmeter. Check if the LED flowmeter blinks blue, while water is coming out.

M_200_5favicon

05

Let the water drain out for at least 2 minutes.

M_200_6favicon

06

Place the coaster under the outlet of water.

Maximum Operating Pressure
735kPa (105Psi)
Minimum Operating Pressure
70kPa (10Psi)
Maximum Water Temperature
40°C (104°F)
Minimum Water Temperature
4°C (40°F)
Filtered Water Flow Rate at 30Psi
4LPM (1.0GPM)
Lifespan
11,365 Liter(3,000GAL) or 1 Year
Battery
CR2032 3V
Replacement
UF filter + Carbon block + Electric positive filter